Fabrication and welding equipment disposal

A workshop sale starts with the equipment the buyer will actually receive. A laser cutter may depend on a chiller and extraction. A tube bender may need matched dies. A fixture beside a welding table may belong to a customer.

Choose the route that matches your equipment or the decision holding up the sale.

Cutting machines and their supporting equipment

For sheet and plate work, start with guillotine capacity conditions or turret punches and their tooling libraries. Automated cutting systems need a wider inventory:

For stock preparation, compare the records needed for metal-cutting bandsaws and cold saws, blades and stock supports. Their capacity descriptions should retain the material and section conditions.

Forming machines and matched tooling

The press-brake guide separates force from working dimensions. Read it alongside the guide to keeping useful press-brake tooling sets together.

Other forming equipment needs its own description:

Before offering customer-specific tooling, complete the press-tool ownership and release register. The fact that an item is no longer used does not settle who can sell it.

Welding sets, cells and fixtures

Start with the actual power-source and accessory combination for MIG welding packages or the model-specific capability of an AC or DC TIG set. Different packages need different questions:

Keep a separate inventory for welding tables and customer-owned jigs. Record unused welding consumables by identity and packaging condition before adding them to a machinery lot.

Extraction, gas and finishing equipment

Identify ownership and installed boundaries before promising a complete package:

These guides provide records to gather and questions for competent specialists. Removal methods depend on the actual installation and contractor assessment.

Organise the viewing and release dates

Use a fabrication-machine demonstration brief to agree what the observation can establish. Then build a workshop equipment release sequence around remaining production and shared services.

UK Auction Group can discuss a manufacturing equipment sale using that inventory and timetable. For a whole workshop closure, explain which machines and services must remain until the final jobs finish.

Return to the asset disposal guide index.

All 30 guides in this topic

A fabrication-machine demonstration: decide what it can prove
Write a focused fabrication-machine demonstration brief that records the equipment, conditions and observed result without overstating performance.
A robotic welding cell is more than the robot
Compare selling a welding robot alone with offering its complete cell, using a boundary map, integrator records and clear software and fixture rights.
AC or DC TIG: say exactly what the used welding set can do
Identify AC and DC TIG capability from the exact model, then describe cooling, controls and accessories without guessing from the machine's appearance.
Closing a fabrication workshop: sequence the equipment sale
Plan a fabrication workshop sale around final jobs, shared extraction, cylinder returns and access, with an example equipment release sequence.
Cold saws: document blades, clamping and included stock supports
Prepare a cold saw sale with a clear list of fitted and spare blades, clamping equipment and stock supports, keeping condition claims specific.
Engine-driven welders: separate welding output from generator claims
Record an engine-driven welder's welding and auxiliary power ratings separately, with engine history, accessories and the limits of any demonstration.
Fibre laser cutters: list the full system, including the chiller
Define a used fibre laser cutter's sale boundary, including source, chiller, extraction, software and shared services before dividing the assets.
Gas cylinders in a workshop sale: check whose they are
Reconcile workshop gas cylinders with supplier and account records before including equipment in a sale or arranging a business closure.
Guillotine shears: make the rated capacity meaningful to buyers
Describe a used guillotine shear's capacity with its material and width conditions, plus backgauge, blade and support details buyers need.
Ironworkers: identify the stations and tools actually supplied
Prepare an ironworker sale listing with a station inventory, marked punch sizes, capacity conditions and a clear list of included tools.
Metal-cutting bandsaws: describe the feed and capacity properly
Describe a used metal-cutting bandsaw's cutting envelope, feed sequence and included stock supports, with clear evidence for automatic functions.
Plasma cutting tables: what is included beyond the power source?
List a used plasma cutting table as a defined package, identifying its power source, torch, controls, extraction and software inclusions.
Plate rolls: describe capacity with the material conditions attached
Describe used plate rolls with the material, width and bending conditions behind the capacity figure, plus a practical specification checklist.
Portable welding fume extractors: ask for performance records
Gather a portable welding fume extractor's intended-use, examination and filter records so buyers can assess the equipment and its limitations.
Press brake tooling: split the cabinet without breaking useful sets
Sort used press brake tooling into meaningful sale lots using profiles, marked ratings, lengths and ownership, while keeping useful sections together.
Press tools and dies: prove ownership before choosing lots
Use a tool release register to separate company assets, customer-owned dies and unresolved tooling before planning a fabrication equipment sale.
Resistance spot welders: record tooling and cooling requirements
Prepare a resistance spot welder for sale by recording its fitted arms, electrodes, controller and the cooling or site services it requires.
Selling a fixed extraction system with or without the machines
Decide whether fixed extraction stays with the building, travels with machinery or becomes component lots, with clear ownership and survey boundaries.
Selling a power press with its inspection records
Gather a power press's examination reports, maintenance history and modification records, then identify gaps for a competent specialist.
Selling a press brake: describe the machine's working envelope
Prepare a used press brake for sale with a clear specification, tooling list and evidence of its working envelope, without overstating capacity.
Selling a turret punch press with its tooling library
Build a sale inventory for a turret punch press, linking its stations to the tools, programs and ownership records actually available.
Selling an older CO2 laser cutter: questions about support
Prepare an older CO2 laser cutter for valuation with machine-specific support enquiries, service evidence and clear answers about missing information.
Selling MIG welders as complete working packages
Match MIG welding power sources, feeders, torches and leads before sale, then define included accessories, condition evidence and exclusions.
Shot-blast cabinets: document media history and dust collection
Prepare a blast-cabinet sale with useful prior-use details, dust-collector records and clear questions about residue, ownership and removal.
Spray booths at workshop closure: equipment or building installation?
Clarify spray-booth ownership, building connections and removal responsibilities before offering a workshop booth or its components for sale.
Tube benders: the dies can change the sale package
Decide whether tube-bending dies belong with the machine. Identify matched parts, tube size, bend radius and ownership before choosing lots.
Unused welding consumables: make the condition visible
Catalogue unused welding wire and electrodes by product identity, packaging condition and storage history without guessing shelf life or suitability.
Waterjet machines: documenting pump and abrasive-system history
Prepare a waterjet sale with pump and cutting-head service records, abrasive-system details and clear responsibility for remaining contents.
Welding positioners and rotators: what the load rating does not settle
Record the conditions behind a welding positioner or rotator's capacity, with controls, matched equipment and questions for the manufacturer.
Welding tables and jigs: keep customer-owned fixtures out of the sale
Separate business-owned welding tables and standard clamps from customer fixtures, using an ownership register before choosing sale lots.